# How to manually move print head

**Manually moving print head**

If your print head needs to be manually moved, you can do so by accessing the Spooler to use the movement buttons.

**Spooler**

1. With printer on and connected, click the gear in the upper right hand corner to access settings\
   \
   ![](https://printm3d.com/solutions/assets/img_55afa8ba128e1.png)\
    
2. Navigate to the advanced settings tab and click the checkbox labeled "Expert Mode" to open the Spooler\
   \
   ![](https://printm3d.com/solutions/assets/img_55afa90b0a79a.png)\
    
3. Locate the movement arrow buttons at the left of the window and use them to move the print head in the direction needed

   ![](https://printm3d.com/solutions/assets/img_567031f63ecb0.png)
4. You can adjust the values to move the print head further in either direction\
   Warning: the print head can be moved "outside" its bounds. So be careful when moving the print head down towards the bed as you can drive the print head into it.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://micro.printm3d.com/guides/how-to-manually-move-print-head.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.